Alloying element like boron, even in small addition, is well known to improve hardenability of steels. Its application can improve mechanical properties of steels and reduce alloying costs. Despite these benefits is not easy to cast boron steels, mainly in dynamical solidification process like continuous casting, due to their crack susceptibility1,2. The strategy of using Phase-Field simulation of the solidification process is based on its proved capacity of predicting realistic microstructure that emerge during solidification under conditions even far from equilibrium3-5. Base on this, some comparative simulations were performed using a three component dilute alloy in a two dimensional domain under unconstrained (isothermal) and constrained (directional) solidification. Simulation results suggested two fragile mechanisms: one related to a deep dendritic primary arms space and other due to the remelting of this region at low temperature. Both resulted mainly from the high boron segregation in interdendritic regions.

Esse artigo apresenta uma metodologia para análise de granulometria por imagem, baseada na modelagem de energia no espaço das freqüências, utilizando a transformada Wavelet. Apresenta uma breve revisão da ferramenta da transformada Wavelet, e detalha a metodologia proposta. Os resultados apresentados foram obtidos utilizando imagens simuladas numericamente e imagens experimentais. Esses resultados mostram uma correlação importante entre a energia dos coeficientes das Wavelets e a distribuição das dimensões dos objetos analisados.

A methodology for granulometric image analysis based on modeling the spatial energy of frequencies, using the Wavelet transform is presented in this article. A brief review of the Wavelet Transform tool is presented, and the proposed methodology is detailed. The presented results were obtained using numerically and experimentally simulated images. These results show the relevant correlation between the energy of the Wavelet coefficients and the size distribution of the analyzed objects.

Numerical simulation of solute trapping during solidification, using two phase-field model for dilute binary alloys developed by Kim et al. [Phys. Rev. E, 60, 7186 (1999)] and Ramirez et al. [Phys. Rev. E, 69, 05167 (2004)] is presented here. The simulations on dilute Cu-Ni alloy are in good agreement with one dimensional analytic solution of sharp interface model. Simulation conducted under small solidification velocity using solid-liquid interface thickness (2λ) of 8 nanometers reproduced the solute (Cu) equilibrium partition coefficient. The spurious numerical solute trapping in solid phase, due to the interface thickness was negligible. A parameter used in analytical solute trapping model was determined by isothermal phase-field simulation of Ni-Cu alloy. Its application to Si-As and Si-Bi alloys reproduced results that agree reasonably well with experimental data. A comparison between the three models of solute trapping (Aziz, Sobolev and Galenko [Phys. Rev. E, 76, 031606 (2007)]) was performed. It resulted in large differences in predicting the solidification velocity for partition-less solidification, indicating the necessity for new and more acute experimental data.

Nesse trabalho, são apresentados os resultados de simulações bidimensionais da formação de dendritas durante a solidificação do níquel e do ferro puros, utilizando um modelo de campo de fase. A morfologia obtida mostrou-se qualitativamente semelhante à forma dendrítica, com braços primários e secundários bem desenvolvidos. Além disso, as velocidades de crescimento em regime permanente, calculadas no presente trabalho, apresentaram boa conformidade com os dados experimentais em uma grande faixa de super-resfriamentos. Foi observado que a espessura da interface apresenta um forte efeito sobre a morfologia e a velocidade de solidificação. Interfaces espessas reduzem o tempo computacional; entretanto podem gerar resultados inconsistentes. A espessura que apresentou os melhores resultados sem aumento acentuado do tempo de processamento foi 4x10-8m.

Numerical results for the solidification morphologies of pure Nickel and Iron, obtained by a two dimensional Phase Field model, conformed qualitatively well with the dendritic form, clearly depicting developed primary and secondary branches. Additionally, the steady state solidification velocity obtained in the present simulations fitted the experimental data over a wide range of undercoolings. It has been observed that the solid-liquid interface thickness has a strong effect on both the morphology and steady state solidification velocity. A thicker interface which might reduce computation time may produce inconsistent results. The best results were obtained using an interface 4x10-8m thick.